Teak corner shower bench – Teak is a wood that is naturally found in the Eastern hemisphere. It is a hard wood that is known to have excellent resistance to moisture capacity. Teak is an expensive wood in the United States because of the distance that has to be sent, but is preferred for shower benches and other furniture by consumers due to its beautiful appearance. The construction of a teak shower bench will be more expensive than the construction of a bank like Cedar however, it will cost much less to build its own what it would cost to buy one.
Place two boards 16 inches at the edge, parallel and 9 inches. Place boards of 9 inches between them so they are perpendicular boards 16 inches and 14 inches teak wood. Screw through boards 16 inches and at the ends of the 9 inch teak tables. This is the framework for your teak corner shower bench. Place the plane frame and the position of the plates of teak wood 15 inch perpendicular to the Interior of the frame corners. Screw through the corners of the frame with four screws for each corner to secure the 15 inch plates. These joints are the legs to your bank. The legs must be even to ensure that your bank not wobble, so make sure the ends of boards of 15 inches are flush with one side of the frame until you are screwed.
12 Photos Gallery of: How to Build Teak corner shower bench
Place the Bank in a vertical position and tighten panel’s 11 inch of the top of the frame. Teak corner shower bench must be parallel with the sides of 11 inch weft. The ends must be flush with the side of 16 inches from the plot. The two outer panels must be flush with the sides of 11 inch weft. Sand bank with sandpaper medium and then grade fine to avoid splinters. Clean the Bank with a damp cloth before use.