Wall Mounted Wire Shelving – First steps is, mark horizontal lines on the wall in the heights your shelves will be mounted. Measure from the floor with a measuring tape and double check how the contour lines are with a carpenter’s level. Second, iinstall wall clips into the wall. The clips hold the back of the shelves against the wall. Depending on the type of wall you will mount clips into. If you are installing solid wood, using wood screws. Drywall, use hollow wall anchors or toggle bolts. Space clips one foot apart.
Third, pprotective cap to click the wire shelf on the clips and let them hang down against the wall. Fourth, aassemble the front support positions for wall mounted wire shelving. Mount a clip on each item at the height of each shelf. There will be holes in the posts predetermined heights, or you can drill your own mounting holes if the heights of your shelves differ from. Screw each clip with a sheet metal screw.
12 Photos Gallery of: Hang Wall Mounted Wire Shelving
Fifth, work from one end, lift the top shelve up away from the wall, and cut it in the vertical support. Now go to the far end of the shelves and do the same. Cut in the intermediate posts, if necessary, and then assign other shelves to the vertical supports, working down from the top. Your wall mounted wire shelving was done.