Installing Beadboard Wallpaper

0

Beadboard Wallpaper – Old walls are sometimes better left alone. If you try to remove layers of old wallpaper, you may find that causes more problems than it had begun. Seal surface, apply beadboard right on top of the background image with a couple of nails and some glue construction, and preserve something of the old nature of the surface. One sure to the surface of the old wall paint over it with a sealant oil-based primer on a roll to give something solid beadboard to adhere and to prevent colors Wallpaper bleeding through painting areas. ┬áMark a horizontal line at that point and draw a chalk line for a straight line, especially if the house is old with slightly uneven walls and floors.

Remove the baseboard molding so installing beadboard wallpaper can start at ground level. Cut through the seams painted with a knife and then carefully pry with a scraper five-in-one and a hammer so you can replace it after installing beadboard.

Install beadboard wallpaper sheets by applying construction adhesive lines every six inches. Key each panel into place at each corner and in the center of the top edge. Measure and cut the pieces to fit, marking the holes for the containers.

Related Search: beadboard wallpaper

Comments are closed.