Measurement for Build Recessed Panel Wainscoting

0

Recessed panel wainscoting differs from the standard raised panel because the panels are flat against the wall instead of sitting a short distance. Sometimes called shaker or flat panel displays, recessed wood paneling can be an ideal wall covering in random areas of the house, as family rooms and bathrooms.

Instructions to measure for build recessed panel wainscoting: draw a simple two-dimensional diagram of the walls on which you will install the paneling. Place the end of the tape on the left edge of the wall near the floor. Pull the tape measure straight toward the right edge of the wall. Note the measurement.

Measure up from the ground to the height of the panels of wood paneling and make a small pencil mark on the left edge, middle, and the right edge of the wall. Place the end of the tape on the left edge of the wall in pencil mark. Pull it straight out to the right edge to the pencil mark. Note the measurement.

Compare the two measurements. If a measurement is longer than the other, use the longest measurement. Finally, to measure for build recessed panel wainscoting, repeat this process for each wall to label all the walls in the diagram.

Related Search: flat panel wainscoting, diy raised panel wainscoting, recessed wainscot, wainscoting measurements

Comments are closed.