How to Rectify Beadboard Cabinets


Beadboard is a compressed compound and other woods often used for decorative touches due to the engraved lines along its length. Beadboard be used for many different projects home improvement, especially cabinets. Covering the front of the cabinets with beadboard cabinets gives character to the gates of flat or otherwise unattractive. This easy solution can be made up in a day and with few supplies.

Instructions to rectify beadboard cabinets: measure the size of the cabinets to be coated. Use a screwdriver to knock down all the doors is reviewed. Beadboard sheets cut with a table saw as measured by the cabinets. Tomes cut in closets to make sure they are properly sized and cut if they are not parts. Grind the edges of each of the pieces of beadboard.

Treat beadboard with any finish you want. Make sure you get the paint or stains on the edges of each piece. Set the beadboard to the fronts of the cabinet doors using nails and a hammer. Apply a thin putty around the edge of the cabinet where the door and join the beadboard. Apply a layer of your chosen end to cover the caulk and seal. Let it dry. Finally, to rectify beadboard cabinets, replace the cabinet doors.

Comments are closed.