White beadboard cabinets are a compressed compound and other woods often used for decorative touches because of the engraved lines running along its length. You can use beadboard to many different improvement projects at home, such as correction of your cabinets. Covering the front of your cabinets with white beadboard cabinets gives character to flush doors or otherwise unattractive way.
Measure the size of the cabinets is rectified with a tape measure. Use a screwdriver to end all the doors you are correct. Cut the white beadboard cabinets sheets with a table saw according to the measurements of your cabinets. Keep the cut against the cabinets to ensure that they are properly sized and cut if they are not parts. Sand the edges of each of the pieces of beadboard. Use sandpaper to get everything smooth and rough to the surface a little edge.
12 Photos Gallery of: White Beadboard Cabinets
Connect the white beadboard cabinets to the fronts of the cabinet doors using finishing nails and a hammer. Fill in the gaps of the heads of the nails with wood putty. Apply a thin bead of caulk around the edge of the box, where the door and the meeting beadboard. This will seal together. Apply a layer of finish chosen to cover the putty and putty. Allow the final dry for several hours. Replace the cabinet doors. Make sure you put the right doors in each cabinet.